1.Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL.
2.Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc.
3.Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery.
4.Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices.
Rated Voltage: 12V/24V
Charge Current: 10A/20A/30A
Discharge Current: 10A
Max. PV Voltage: 50V
Max Solar input: <50V
Float Charge: 13.7V (defaul,adjustable)
Discharge Stop: 10.7V (defaul,adjustable)
Discharge Reconnect: 12.6V (defaul,adjustable)
Operating temperature: -35~+60℃
USB output: 5V/2.5A
1 x Solar Charge Controller
1X User Manual
1: How to install it? 1.Battery 2.Solar panels 3.load
2: Please install the charger controller on a flat, well-ventilated place (indoor)
3: The LCD screen has an error of 0.2V to 0.3V, but this is normal.
4: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries.
5: This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power.