No Products in the Cart
Features:
1. Well quality: Use by well quality ABS material, it is durable to use outdoor and long term use.
2. PIR motion sensor: The sensitive PIR sensor light can detect people's movement from 3m to 6m. PIR sensing angle is 120 degrees, It will automatically control the light on and off.
3. Mode: Sensing mode at night, the lights will auto bright when people walk by, and will turn off after people have walked for 15-25 seconds
4. IP65 water-resistant: The Solar Light is made of ABS and IP65 Water-resistant material. It can work in different kinds of weather like rain snow and fog.
5. Long working hours: If fully recharges the battery for more than 8 hours with direct sunshine, it will keep lighting more than 8 hours
6. Powered by solar energy: The solar panel is at the top of the lamp. It will automatically store electricity during the day. Please install the product at the direct sunshine place.
7. Super bright: 436pcs LED beads, three sides of the light plate, can illuminate the scope of 60 square meters, The illumination Angle of 300 degrees, Much brighter than other lamps.
8. It is easy to install without pulling wires. It is only necessary to fix the product on the wall with a screw, suitable for garden, courtyard,aisle, porch, courtyard or driveway, etc.
Specification:
Type: Solar Wall Light, Garden Light
Material: PC+ABS
LED QTY.: 318/436 LED (Super Bright)
Features: Motion Activated, Solar Sensor, Waterproof/ Rainsafe
Power Source: Solar
Sensing distance: 3-6 meters
PIR sensing angle: 120 degrees
Input Voltage: 5.5V
Total power: 87W
Light source: Solar Light
Light color: White
Power source: 1* 3.7V 2200mAH 18650 lithium battery
Charging hours: ≥8hrs
Working hours: ≥8hrs
Control modes: Light/ PIR
High light delay: 15-20s
Waterproof: IP65
Recommended installation height: 1.8m-2.5m
Color temperature: 6500K-7000K
Lumen: 30000LM
CRI>70
Operating environment temperature: -40℃ to +85℃
Size: 145*115*52mm/5.7*4.52*2.04inch(approximately)
Net Weight: 260g/pcs (approximately)
Function:
1. During the day, the solar lamp is automatically turned off and the solar panel automatically charges the battery.
2. At night, the lamp will automatically enter the standby state. When the person enters the luminaire induction distance and range, the luminaire will automatically turn on the highlighting mode after PIR induction. When the person leaves the sensor and range, the light will be off automatically after 25 seconds. Re-enter standby mode.
Package Listing:
1/2pcs * Outdoor LED Solar Light(pls choose the qty)
1 * Expansion Pipe
1 * Screws
1 * User Manual
|