433Mhz High Power 1000M Ultra Long Distance Remote Key Control Copy Remote Key Controller

Are you worried about losing your remote control keys and paying the manufacturer a large fee to replace them?
The Remote Control Duplicator is the easiest and least expensive way to copy any wireless remote, garage door opener, and more!

①Must have available remote control
②The crystal frequency and chip model of the remote control should be known for purchase.
Compatible chips: 2264, 2262, 2260, 2240, 1527, 527, SMC918 etc.
2264, 2262, 2260, 2240, 1527, 527, SMC918 and other incompatible chips.
All rolling code chips such as HCS301, HCS101, etc.
Support frequency: 433
If you are not clear about the remote control chip and frequency and consult the original merchant, or disassemble the remote control to see the motherboard chip and frequency (usually labeled.)

Specification:

Working voltage: DC12V/27A

Operating frequency: 433mHz RF

Standby current: 0mA

Working current: 10m

Coding methods: EV1527 (learning code), PT2260 (fixed code)

Transmission Distance: 1000m (Open space is more than 1000 meters)

Output power: 13dBm (20mW)

Transmission rate: < 10Kbps

Modulation mode: OOK (amplitude modulation)

Working temperature: -30℃~+70℃

Applications: Roller shutters, Access control gates,Water Pump, Motor, Lamp,Garage doors, etc.

Package includes:

1*433MHZ Remote Control（Battery is included.）

Clear code: as shown in the picture according to the style press and hold the corresponding button, until the indicator light keeps flashing, then release to clear the previous code.
Release to clear the previous code.
Note: This step is a new remote control, be careful not to mistakenly clear their original remote control.

Learning: Hold the old and new remotes in both hands, press the corresponding buttons of the two remotes at the same time to learn, and try to get close to the old and new remotes as much as possible.
When the indicator light blinks rapidly, let go of the hand that copy successfully.
Note: two styles of remote control copy are the same, four buttons were operated four times, if the learning code is invalid, you can then clear the code to repeat the learning code
If the learning code is invalid, you can clear the code again and repeat the learning code to try.