4-in-1 Remote Control Duplicator 433mhz Clone Remote Control Copy Controller Wireless RF Transmitter Switch 4 Button

Are you worried about losing your remote control keys and paying the manufacturer a large fee to replace them?

The Remote Control Duplicator is the easiest and least expensive way to copy any wireless remote, car key, garage door opener, and more!

Specification:

The device can clone up to 4 remote buttons from the same or different remotes allowing you to carry four remotes in one!
You can open your garage door and unlock your car by using one remote control instead of carrying two keys with you.
The seamless infrared connection is secured and safe to use through data encryption.
You can copy any compatible wireless remote key and each password is stored individually.

Specifications:
1. Working frequency: 433MHZ
2. Working current: 20MA
3. Working voltage: 12V
4. Remote control distance: ≥50M
5. Copy method: copy together at close range
6. Power supply: A 12V/27A battery(Included)
7. Working temperature: -20~55 ℃

Note:
1. Only applicable to remote control with learning codes or fixed codes
2. Not suitable for remote controllers with HCS301 chip

Switching remote control channel:
1. Keep Pressing the button 'BC' at the same time，when the Green indicator flashes then switch to the
second remote control, release them, then it works.
2. Keep Pressing the button 'BC' at the same time again，when the blue indicator flahses then switch back to the
first default remote control.
3.Note：The working status of the two remote controls do not affect each other.

Clone specifications(Need to switch channels):
Four-button remote: Copy 2 pcs Four-button remote
Three-button remote: Copy 3 pcs Three-button remote(One of the remote controls can only clone 2 keys)
Two-button remote: Copy 4 pcs Two-button remote
One-button remote: Copy 8 pcs One-button remote

Features:
1. One four-button remote control can be converted into two four-button remote controls without affecting each other.
2. The chipset compability: 2260(All the manufacturers) , 2262(All the manufacturers) ,PT2264,5326(All the manufacturers),
SC5262,HT600,HT680,HT6207,HT6010,HT6012, HT6014,SMC918 Series,527(All the manufacturers) ,1527(All the manufacturers) , 2240(All the manufacturers).
3. Recovery: If erase the code by mistakes, don't worry we can recover it by Pressing the button C&D at the same time for a bit long time, when the led flashes, the codes is recovred.

Instruction:
Step1: Before copying, you need to clear the code firstly. Press the Up two buttons of the duplicator at the same time, then the indicator will flash,
it means the code is cleared successfully.
Step2: Press the button of the multi-frequency duplicator and the original encrypted remote control respectively, either simultaneously or sequentially, and keeping pressing.
The indicator of the multi-frequency duplicator will blink 2-3 times constantly,and will be on,then release it, copy successfully, Copy the other codes by following this step.
Step3: If you need to clone the second remote control, you need to switch channels and repeat step 2.
Tip: press the cloned-button on the clone remote, If the led indicator turns on all the time,that means that the code is cloned successfully.

Packaging includes:
2x 433mhz copy remote Control